Water knot
The water knot (or tape knot) is a knot frequently used in climbing for joining two ends of tubular webbing together, for instance when making a sling. To tie, first form an overhand knot in one end and then follow it with the other end, feeding in the opposite direction.
Security
The ends should be left at least three inches long and the knot should be "set" by tightening it with full body weight. The ends can be taped or lightly sewn to the standing parts to help prevent them from creeping back into the knot. Inspect the knot before each use.
Testing has shown the water knot to slip very slightly, but very consistently, with each load and unload cycle. In tests using 9/16 in (14.3 mm) tubular webbing, repeated loading and unloading with 250 lbs (113 kg) caused one of the 3 in (76 mm) tails to work back into the knot in just over 800 loading cycles. When the water knot was statically loaded with 200 lbs (91 kg) no slipping was observed. These results validate the need to leave long tails and inspect water knots before each use.
There are so many, many knots available to us all. There are three specific knots that I will talk about here.
This knot can tie two ropes or two ends of a rope together.
This knot is used to tie a non-slip loop on the end of a rope
I think the usage of this handcuff knot is self-explanatory
The name of the game is "Bondage and Discipline", not "Cuffs and Discipline". Bondage is an elemental part of B&D sessions. If you are insecure about your knot-tying abilities, your client will definitely notice it.
These three knots above should be considered 'bare minimum requirements' for anyone wishing to do sessions. For safety reasons, you should also be able to tie and untie them in the dark.
See also Curricula and/or Rope and Knot terms
This article is about either
|
What links here • References and Sources • Contact info • Category:Root ⤴